Locked Retaining Clip 1. Connect one end of the chassis intrusion sensor or switch cable to this connector. See page for details. Orient the red markings on the floppy ribbon cable to PIN 1. The contents of the support CD are subject to change at any time without notice. Remove the system unit cover if your motherboard is already installed in a chassis. The number of device items that appears on the screen depends on the number of devices installed in the system.
|Date Added:||4 December 2017|
|File Size:||64.43 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced.
Thus, connection cannot be made on the first try. The utility copies the current BIOS file to the floppy disk. For system failure due to overclocking, use the Xsus.
Microcode Updation [Enabled] Disables or p5g1d the microcode updation function. The configuration options vary depending on the CPU installed. Move the jumper cap from pins default to pins Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. A configurable field is enclosed in brackets, and is highlighted when selected.
Tips and additional information to help you complete a task.
ASUS P5GD1 PRO – motherboard – ATX – LGA775 Socket – i915P
These connectors are set to Standard IDE configuration by default. Use of two new identical hard disk drives is required for this setup. Save your changes and exit Setup.
Select either of the following configuration options: R A I D 0 Data striping optimizes two identical hard disk drives to read ueb write data in parallel, interleaved stacks.
P5gd1 pro specifications summary – Asus P5GD1 Pro User Manual
View the online help for detailed information. Use any of the recommended configurations in Table 1.
Refer to the table below for details. A u t o – loads the optimum sensitivity and overclocking percentage setting.
Reboot the system from the hard disk drive. Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. These are not jumpers!
Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. Do this last option only if the first two failed.
P5GD1 PRO | Motherboards | ASUS Global
Security Settings Supervisor Password: A u t o – loads the optimal settings for the system. You can also restart by turning the system off and then back on. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, saus user is encouraged to try to correct the interference by one or more of the following measures: Close the load plate Athen A push the load lever B until it snaps into the retention tab.
You can install this utility using three different modes: See page for details. Do not place the product in any area where it may become wet. Information to prevent damage to the components when trying to complete a task.
This port connects a microphone. Save the BIOS file to a floppy disk, then restart the system.